Safety Tips for Operating a Baler to Prevent Injury

When powerful metal equipment such as balers are used incorrectly, serious injuries—including crushing, amputation, and even death—can occur. However, the majority of these injuries are preventable. To ensure the safety of their employees, businesses should emphasize the importance of following these safety tips for operating a baler.

Properly train operators

Prior to using baling equipment, all operators should be properly trained by qualified personnel. This training should include detailed information on policies, procedures, and safety precautions. Evidence of each operators’ training should be properly documented.

Wear protective gear

When operating or working near a baler, all employees should wear proper protective gear, including safety glasses, gloves, goggles, ear plugs, hard hats, and steel-toed shoes.

Power down baler when clearing jams

Many baling injuries occur when operators attempt to clear jams without turning off the machinery. Although the ram motion will cease during a jam, the baler remains in operation and could reactivate at any time. As such, it’s essential to disconnect the machine’s power supply before clearing a jam to prevent grievous injury.

Turn machine off when not in use

To prevent unauthorized personnel from using the baler equipment, operators should always remove the key from the switch when the baler isn’t in use.

Perform regular inspections

Before each use of the baling equipment, a proper inspection should be completed to highlight any potential safety issues. Equipment inspections should include checking electrical panels for damage or debris, examining hoses for leaks or abrasions, and checking for cracks or signs of wear in the steel structure.

Display clear warning signs

Displaying proper warning labels on baling equipment is mandated by law. However, these warning signs may not be present on older models. As such, it’s important to ensure that your equipment notifies users of pinch points, age requirements, automatic operation, high voltage, and maximum operating loads—a typical 60-inch vertical baler “should produce bales between 800 and 1,000 pounds.”


By following these safety tips for operating a baler, you can decrease the risk of baler-related injuries in your company.


Key Differences Between a Baler and a Waste Compactor

Balers and waste compactors are both useful tools for making the waste management process easier and more cost-effective. However, if you are new to the waste management industry, you may not understand the key differences between a baler and a waste compactor. While they both use a compressing process to reduce the volume of waste materials, they also have many differences that are important to understand when choosing between the two systems. This side-by-side comparison will help you decide which waste handling system is a better fit for your company.

Waste Balers

You can use waste balers to condense dry, recyclable materials into consistently-shaped bales. They are an ideal option for compressing waste such as paper, metal, cardboard, and plastics. By compressing these materials into dense bales, they become significantly easier to store and transport as they take up much less space. Additionally, compacting these materials won’t just cut down on waste transportation costs, waste balers will also allow you to add an extra revenue stream to your company by selling the bales to a recycling plant.

Waste Compactors

Unlike balers, you can use waste compactors to compress large quantities of mixed waste that is often unsorted and non-recyclable. Since the average recycling contamination rate among communities and businesses is roughly 25 percent, compactors are a popular waste handling system option for many companies. By decreasing the volume of their waste onsite, businesses can greatly reduce waste-collecting costs. This is because companies pay an amount based on the volume of waste they produce in addition to how many trips waste collecting companies must take to transport it to a landfill.

Ultimately, the key difference between a baler and a waste compactor is the materials that they process. For condensing recyclable materials, you should choose a mixed baler. However, compactors are the ideal option for compressing large quantities of mixed waste. Both systems have the potential to save your company a large amount of money on waste transportation costs, and balers can even make money if you choose to sell the bales to a recycling plant. As such, purchasing either one of these systems for your business is a practical and cost-effective investment.


Vertical or Horizontal Baler: Which is Right for Your Company

Balers play an important role in many companies by providing energy-efficient solutions for managing waste. The most common types of balers are vertical balers and horizontal balers. Vertical balers process recyclable waste materials using a vertical downward force, and horizontal balers use a ram to compresses the waste from the side. When determining whether a vertical or horizontal baler is right for your company, it’s important to consider the following key factors.

Quantity of Material

The primary factor to consider before you buy a baler is the amount of material you expect the machine to process each week. If your company produces more than 100 tons of recyclables a month, a horizontal baler is likely the right choice. Horizontal balers can typically process a much higher volume of bales per day than vertical balers. In addition, horizontal balers produce larger bales with more consistent densities and weights.


If you have a limited amount of space, vertical balers are the more practical option. Vertical balers are much smaller than horizontal balers, which can reach up to 40 feet in length. While some larger vertical balers require a ceiling height of 14 feet or more, some specialty vertical balers can operate in an area with a standard 8-foot ceiling.


One of the main benefits of vertical balers is their low cost. Vertical balers are significantly cheaper than horizontal balers; they can often be found for one fifth or even one tenth of the price. However, the higher efficiency of more expensive horizontal balers can end up making up for the initial cost if your company needs to process larger amounts of waste. Plus, you can always consider buying used bailing equipment to help lower costs.

Ultimately, choosing between a vertical or horizontal baler for your company will depend on your business’s needs. Regardless of which type you choose, both options have the potential to cut company costs and increase efficiency.



In industries such as chemical processing, food and agriculture, to name a few, employees and the equipment are more vulnerable to getting affected by the polluted air.

Dust, dirt and debris get mixed with the air, making it detrimental to the health of people and functionality of the machines.

To make the manufacturing or processing facility safer and clean, it is essential to install dust collectors.

When the workers breathe the contaminated air, their lungs get affected. Read more


The Dos and Don’ts of Shredders for Recycling

Paper shredders play an important role in stopping serious criminal offenses such as identity theft. Even though these machines go a long way in keeping an organization’s secrets, most companies don’t know the first thing about these machines. As a result, they have trouble managing the waste created by paper shredders. Read more



A baler is a recycling equipment that turns scrap into valued commodities. It’s proving to be quite effective for businesses and has a growing popularity.


While balers can range in purchase price from slightly more than $1,000 to hundreds of thousands of dollars, businesses that produce large amounts of traditional recyclables shouldn’t let the price tag scare them away from investing in this equipment. Read more


Crigler Enterprises appoints new President

Kathryn Renzi, who has served as Crigler Enterprises Executive Vice President for the past three years, has been named President as of December 31, 2017. In addition, it was announced that Wayne Crigler will now serve as CEO.

Kathryn says she looks forward to her new position and is excited to see the company grow in its next generation of management.


Crigler Enterprises Inc. Miami, FL

Crigler Enterprises has been in business for 42 years in which we have established long standing professional relationships with our customers. Crigler Enterprises has the biggest fleet in the southeast with a great presence in the South Florida area; we have been servicing Florida for over 22 years out of our Miami office.

miami 78miami79miami80


We have a full service department dedicated to keeping our customers up and running. Some of our specialty services include:

  • Elimination of operator labor
  • Complete electrical and hydraulic rebuilds
  • Upgrading processors and panels
  • Customizing automation software
  • Remote control operation systems

We also buy and sell new and used equipment and provide worldwide consulting services for modernizing controls.



Hard Drive Shredders

Crigler Enterprises has recently started marketing the Ameri-Shred line of hard drive security shredders.


Wayne Crigler says “We are finding many firms with need to permanently destroy records stored on computer hard drives. These organizations include schools, (most recently Ohio State University), hospitals, communications, and credit firms”.

The Ameri-Shred hard drive shredders are affordable, efficient, and take up minimum floor space.

Contact Crigler Enterprises for a quote today or visit our Products and Applications page to learn more.


Increasing Market Value of your Scrap Paper

Crigler Enterprises can design, furnish and install sorting, conveying and separation systems for every recycling application. We specialize in the “mini” MRF systems, which offer excellent value, especially in fiber recovery. This video show a “Fines screen” removing debris from a stream of mixed paper, which increases the market value of the paper in the marketplace.