Blogs

24
May

The Negative Impacts of Recycling Contamination

Recycling contamination occurs when people attempt to recycle unrecyclable materials or place items in the wrong recycling container. According to the National Waste and Recycling Association, roughly 25 percent of the items American’s try to recycle are contaminated. While it may seem relatively harmless toss a couple of unrecyclable items into a recycling bin, doing so can have serious consequences. From increasing waste to putting waste-management workers in danger, these are some of the main negative impacts of recycling contamination.

Increases waste

Most facilities don’t have the time or funds to individually separate each piece of unrecyclable material that enters their machines. All recycled materials enter the same recycling system. So, if some of the items in the bin aren’t recyclable, they could contaminate the entire load. As a result, huge quantities of previously recyclable materials may head off to a landfill due to the contamination.

Damages machinery

Manufacturers do no design recycling equipment to process unrecyclable materials. As such, when unsuitable items end up in recycling bins, they could cause jams and damage the machinery. Not only does this slow the recycling process, but it can also be very costly as recycling facilities have to invest in repairing or completely replacing equipment.

Puts workers in danger

Scrap recycling equipment can be dangerous if it isn’t working properly. As such, by recycling unrecyclable materials that may cause issues within the machinery, you could be putting workers at risk. Further, placing waste in recycling bins potentially exposes workers to dangerous chemicals or infectious diseases.

Reduces the quality of recycled goods

When unrecyclable materials wind up in recycling bins, the quality of recycled goods decreases. Decreasing the market value of these goods places a strain on the recycling industry which could increase the cost of service. Thus, making it more difficult for people to recycle in the future which will further harm our economy and planet.

22
Jan

Do’s And Don’ts Of Baler Maintenance

In a typical waste processing, recycling, or scrap metal facility, you’ll find forklifts, loaders, and balers, among other equipment. Balers are the core of any recycling operation, as they enable easy transportation of materials such as metals, plastics, or scrap paper after compressing them.

Over time, however, the baler machine is subjected to wear and tear which can cause malfunctions. These result in  severe downtimes if the company can’t find major replacement components of a baler machine. Moreover, repair work can take several days to finish. Read more

21
Jan

Signs You Need A New Baler

Balers are used in recycling facilities to compress materials such as plastics, scrap paper or metals. Compressing enables easy transportation of materials throughout the facility and also to other places for usage. Read more

18
Jan

The Fundamentals Of Textile Recycling

Textile recycling refers to the recovery of old textiles and clothing for reuse. A typical textile process includes collecting, sorting and processing the textiles, which later gets transported to consumers.

The core of the textile recycling industry is the growing textile industry. The US—with its exceptional research and development in the textile industry—had exported textile and fiber worth approximately $28 billion back in 2015. Read more

17
Jan

Tips For Reducing Commercial Waste Management Cost

Without proper planning waste management programs can take a huge portion of your company’s budget. If you feel like your company is spending too much money on its waste management program, it’s time to revamp your strategy.

Here are a few tips to help you cut down your costs on commercial waste management. Read more

16
Jan

Benefits Of Industrial Recycling

According to the EPA, around 262 million tons of Municipal Solid Waste (MSW) was generated in the US during 2015. And while the production of waste is inevitable in every industry, when recycled, this waste can provide your company with many benefits. Moreover, recycling waste causes less strain on the environment and leads to a more sustainable future. Read more

18
Dec

Baler Guide: Answering the FAQs

Balers assist the recycling facilities by providing energy-efficient solutions for their waste management. They are known for their robustness and longer service span. The most commonly used balers include vertical balers, horizontal balers, two ram balers, and full-eject balers. Various factors should be taken into account before choosing a baler for your industrial facility. Operational footprint, ceiling height, capacity, and power requirements are the many factors that influence your choice of balers. Read more

17
Dec

Paper Recycling: Ways to Go Green

Global warming has lead to a number of environmental problems. The burning of paper emits greenhouse gases like methane and carbon dioxide. The gases absorb the heat produced by infrared radiation, slowing down its escape from the atmosphere.

The rising temperature is causing glaciers to melt. Small islands are exposed to the dangers of flooding. Droughts, floods, and smoldering heat, the climate around the globe is gradually worsening! Read more

17
Dec

Tips To Maintain A Functioning Conveyor System

With growing environmental concerns, industries are seeking ways to recycle their industrial waste. Conveyor systems provide effective waste handling solutions to recycling facilities. They have replaced the tedious process of manual sorting. They allow safe handling of heavy materials and prevent workers against risks associated with manual handling of materials. Read more

14
Dec

6 Things To Consider Before Buying A Used Baler

The recycling industry has gained momentum in recent years. Recycling activities in the U.S. have tripled over the last 30 years. A recent survey by the EPA confirmed that the recycling industry has contributed $36 billion to the U.S. economy in a year.

Balers are ideal options for industries that are seeking reliable equipment for scrap management.

Buying a used baler is an economical solution for industries that work with tighter budgets and can’t invest in brand new equipment. Read more